Weighbeam DWB 11.5 Loadcell Schenck process Vietnam

Mã sản phẩm:

DWB 11.5 t, DWB 15 t, DWB 25 t schenck process

Mô tả:

Schenck Việt Nam cung cấp sản phẩm về cảm biến cân, loadcell Schenck process,DWB 11.5 t, DWB 15 t, DWB 25 t, dùng nhiều trong ngành thép, đường sắt, định mức từ 11,5 tới 800 tấn

Chia sẻ:

Số lượng

Chi tiết sản phẩm

Loadcell DWB 15 t Weighbeam Schenck process Việt Nam

Weighbeam DWB 11.5 ... 25t Schenck Việt nam

Thông tin sản phẩm hãng: SCHENCK

Thông tin sản phẩm tại Việt Nam: SCHENK VIETNAM

Simple and economical installation through direct screwing onto the connecting structure
Transmission of high interferential forces and moments at minimal impact on measurement value
Extremely low headroom %
Designed for rugged environment
Suitable for construction of service free scales
Option: HT-type for service temperature up to 120°C

		DWB 11.5 t			DWB 15 t		DWB 25 t	Reference

Rated capacity	L_n	11.5 t				15 t	25 t

Limit load (with L_q = 0.15xL_n)	L_I	23 t				26 t	35 t

Rupture load (with L_q = 0.15xL_n)	L_d	35 t				38 t	40 t

Max. admissible side load	^Lqmax	15 t				18 t	25 t
Sensitivity	C_n	0.90 mV/V			1.16 mV/V		1.40 mV/V	L_n

Combined error	^Fcomb			±0.3%				C_n
Creep (30 m)	^Fcr			± 0.05 %				C_n
Input resistance	R_e	378 Ω			378 Ω		756 Ω	T_r

Output resistance	R_a	350 Ω			350 Ω		700 Ω	T_r

Ref. supply voltage	^Usref					10V
Max. supply voltage	^Usmax	18V				18V	36V
Nominal temperature range	^Btn			- 10°C to + 40°C
Service temperature range	^Btu	- 15°C to + 80°C (HT quality + 120°C)
Reference temperature	T_r				+ 22°C

Storage temperature range	^Bts	- 30°C to + 85°C ( HT quality + 120°C)
Temperature effect on zero signal	TK_o	± 0.1% / 10K ( HT quality: ± 0.05%)						C_n in B_tu

Temperature effect on sensitivity	TK_c	± 0.07% / 10K ( HT quality: ± 0.05%)

Dead weight	m_e	18kg				18kg	18kg

Corrosion protection			hot dip galvanized

Protection class					IP 67

Cable specification		silicone RAL 7000 (grey)
Cable specification		Ø 6.5mm x 15m – 30°C to + 150°C
		Ø 6.5mm x 15m – 30°C to + 150°C

		black	: input			+ (82) / blue : input - (81)
Colour code		red	: output			+ (28) / white : output - (27)
		green-yellow	: screening

Cảm biến loadcell Schenck process DWB 11.5, DWB 25 t

DWB 25 t Weighbeam Loadcell Schenck process Việt Nam

Variants	Order No.
DWB 11.5 t	D 703 100.01
DWB 15 t	D 703 100.02
DWB 25 t	D 704 280.03

DWB 11.5 t HT

D 703 100.04

DWB 25 t HT

D 704 280.05

ứng dụng của sản phẩm:

Silo and hopper scales

Crane scales

Rail weighbridges

Scrap bucket, roller train, and tundish scales

Platform scales

Đặc điểm, tính năng:

High degree of reliability and availability

Virtually impervious to shock loads and unavoidable side forces

No need for additional tie-rods and hold-downs

Design, installation and operation are extremely simple and cost-effective thanks to the absence of mounting elements.

Flexible solution for many and varied applications
Highly accurate weighing in any environment
Easy installation, absolutely no maintenance
Savings through reduced structural steel costs
Rated load: 11,5 t – 800 t
Accuracy classifications: combined error from 0.1% to 0,03 % (OIML class C2, legal-for-trade)

Loadcell DWB 25 t hãng Schenck Việt Nam

SENSiQ® WB Weigh Beam
The standard for tough tasks especially in the steel segment. Available from 11,5t to 800 t capacity. Reaches an accuracy of up to 0,1% combined error. There is also a high temperature version available up to 180°C. A a round version is also available.

Weigh Disc
The flat, more accurate and even better protected alternative to the weighbeam. Reaches an accuracy of 0,07% combined error, is suitable in special version up to 200°C and has a very low height profile.

Railtec Sensors
Created for very accurate measuring results (up to C2 legal for trade) in the harsh environment of a rail track and industry costumer with track system. Weigh Disc WDI and Weighbeam DMR are used in our MULTIRAIL products.

Measuring Eye
If it is not physically possible or is not cost effective to include weighing equipment under or around a structure, then our measuring eye is an alternative. This very small sensor can be placed directly into the structure and measures precise any tension. Depending on the structure and the position of the measuring eye it is possible to measure weights e.g. in a hopper with an accuracy of up to 0,5%.

Radial Force Transducer
If it is required to measure the load on an axle, such as with crane scales, this is a solid and very accurate solution. It measures in the axle mount with an accuracy up to 0,1%. Dimension of the axle hole can be adopted individually.

Measuring Axis
Sometimes it is better to replace the axle itself with a measuring axle instead of measuring within the mount. Here we have some standard sizes available but we can also create any dimension that is required.

Plate thickness “B”: Plate thickness depends on total construction stiffness. Connecting surfaces plate thickness must be at least 40% of weighbeam height

Surface quality “C”: The requisite mean rough value of connecting surfaces is around 6.3µm

Planeness “D”: The maximum admissible tolerance of each contact surface is 0.05 mm

Construction

Low and compact design

Galvanized surface

Protected to IP 67

Đại lý Schenck process Việt Nam

The original, proven over more than 30 years, optimized to the latest state of technology

Expanded to an operating temperature from -40 °C … 180 °C

High precision with a maximum combined error of ±0.07 % across the entire temperature range

Extremely robust and maintenance-free, IP68  6-wire circuit

Integrated sensor for temperature monitoring and compensation, and integrated overvoltage protection

Separate installation of the connecting cable through plug connection on the Weighbeam, also available as hinged plug outlet

Thiết kế, cài đặt và vận hành cực kỳ đơn giản và tiết kiệm chi phí nhờ không có các yếu tố lắp đặt.

Giải pháp linh hoạt cho nhiều ứng dụng đa dạng
Cân chính xác cao trong mọi môi trường
Cài đặt dễ dàng, hoàn toàn không cần bảo trì
Tiết kiệm thông qua giảm chi phí kết cấu thép
Tải định mức: 11,5 t - 800 t
Phân loại độ chính xác: lỗi kết hợp từ 0,1% đến 0,03% ( lớp OIML C2, hợp pháp cho giao dịch)

SENSiQ® WB Cân trọng lượng
Tiêu chuẩn cho các nhiệm vụ khó khăn đặc biệt là trong phân khúc thép. Có sẵn từ 11,5t đến 800 tấn công suất. Đạt độ chính xác lên tới 0,1% lỗi kết hợp. Ngoài ra còn có một phiên bản nhiệt độ cao có sẵn lên tới 180 ° C. Một phiên bản tròn cũng có sẵn.