Đại lý độc quyền Cs Instruments Việt Nam

Mô tả:

Công ty Tăng Minh Phát là đại lý hãng CS Instruments tại Việt Nam

Chia sẻ:

Số lượng

Chi tiết sản phẩm

CS INSTRUMENTS TẠI VIỆT NAM

Hãng Cs instruments chuyên cung cấp các thiết bị đo lưu lượng khí, cảm biến áp suất và thiết bị đo cho khí nén

DANH MỤC SẢN PHẨM

1. Thiết bị đo lưu lượng điểm sương CS Instruments

2. Đồng hồ đo lưu lượng

3. Thiết bị phát hiện khí rỏ rỉ CS Instruments

4. Cảm biến áp suất

1. Thiết bị đo lưu lượng điểm sương CS Instruments

Đại lý Cs instruments Việt Nam

Intelligent chart recorder for compressed air and gases Measurement - control - indication - alarm - recording - evaluation		DS 500 + Accessories
Intelligent mobile chart recorder Energy analysis - consumption measurement - leakage calculation at compressed air systems		DS 500 mobile + Accessories
Affordable mobile chart recorder, Energy analysis - flow measurement - leckage calculation at compressed air systems		DS 400 mobile
Mobile current/effective power meter suitable for DS 500/ DS 400 mobile		CS PM 600
CS ENERIUM 30 Current/effective power meter for panel mounting		CS ENERIUM 30
Hand-held instrument e.g. for flow measurement		PI 500

HUMIDITY/DEW POINT MEASUREMENT

VA 520 Đồng hồ đo lưu lượng khí Cs instruments

Đồng hồ đo lưu lượng VA 550 CS

Portable dew point meter for relative humidity, temperature, dew point measurement		DP 500 / DP 510
DP 400 Portable dew point meter with integrated pressure sensor		DP 400 mobile
DP 400 Dew point sensor for membrane and desiccant driers		FA 510/515 DS 52-Set
Dew point sensor for refrigeration driers		FA 510/515 DS 52-Set
Dew point set for compressed air and gases		DS 400
FA 550 Dew point measurement for refrigeration, membrane and desiccant dryers		FA 500
FA 550 Dew point measurement in explosive areas		FA 515 Ex
Accessories mains units
Accessories for dew point measurement and calibration

Product	Sensor input 1+2	Sensor input 3+4
DS 400 mobile - mobile chart recorder with graphic display and touch screen	Digital	----------	0500 4012 D
	Digital	Digital	0500 4012 DD
	Digital	Analogue	0500 4012 DA
	Analogue	----------	0500 4012 A
	Analogue	Analogue	0500 4012 AA
Options:
Integrated Ethernet- and RS 485 interface			Z500 4004
Integrated webserver			Z500 4005
"Mathematics calculation function" for 4 freely selectable channels, (virtual channels): addition, subtraction, division, multiplication			Z500 4007
"Totalizer function for analogue signals"			Z500 4006
2 additional sensor inputs for analogue sensors (like: pressure, temperautre sensors ...)			Z500 4001
2 additional sensor inputs for digital sensors (SDI/Modbus)			Z500 4003
Further Accessories:
CS Soft Basic - data evaluation in graphic and table form, reading out of the measured data via USB or Ethernet			0554 7040
CS Soft Energy Analyzer for energy and leakage analysis of compressed air stations			0554 7050
Software Upgrade of the already existing CS Soft Basic to CS Soft Energy Analyzer			0554 7045
Connection cable for VA/FA 5xx series on mobile instruments,ODU / M 12, 5 m			0553 1503
Connection cable for VA/FA 400 series on mobile instruments,ODU / M 12, 5 m			0553 0503
Connection cable for pressure,temperature or external sensors on mobile instruments, ODU / open ends, 5 m			0553 0501
Connection cable for pressure,temperature or external sensors on mobile instruments, ODU / open ends, 10 m			0553 0502
Extension cable for mobile instruments,ODU / ODU, 10 m			0553 0504
Connection cable for mobile current/effective power meter to DS 500 mobile, 5 m			0553 0506
Case for all sensors (Dimensions: 500 x 360 x 120 mm)			0554 6006

3. Thiết bị phát hiện khí rỏ rỉ CS Instruments

FLOW/CONSUMPTION MEASUREMENT CS INSTRUMENTS

Precise flow measurement for compressed air and gases for heavy duty industrial applications		VA 550/570 (ATEX)
Flow sensors for compressed air and gases		VA 500/520
Flow station for compressed air and gases		DS 400
Flow direction switch for compressed air systems		VA 409 Cs instruments Việt Nam
Useful accessories: Measuring sections, Drilling jig
Useful accessories: Spot drilling collars, thickness meter
Calibration of flow sensors

Compressed air quality according to ISO 8573

Compressed air quality measurement
according to ISO 8573

OIL-Check/PC 400

4. Cảm biến áp suất

LEAKAGE MEASUREMENT

Leak detector with camera		LD 500 / 510
Leak detector for compressed air systems		LD 400

Products not included in the catalogue:

FA 540 dew point sensor with same pinning at M12 plugas FA 410		FA 540
FA 545 dew point sensor with same pinning at M12 plugas FA 415		FA 545
Terms & Conditions

Thiết bị đo hàm lượng dầu
Residual oil measurement:
OIL-Check 400 – residual oil content measurement of the vaporous residual oil content from 0.001…2,5 mg/m³, 3…16 bar. Highly precise PID sensor, integrated mini catalyst for zero point calibration, without integrated display, with analogue output 0…10 Volt for connection to an external chart recPart

Thiết bị đọc giá trị
Model : DS500
Intelligent chart recorder DS 500 mobile, 4 sensor inputs

Cảm biến đo điểm sương
FA 510 Dew point sensor, -80...+ 20 ° Ctd incl. measuring chamber mobile and 5 m connection cable to mobile devices

VA 570 - Flow sensor with integrated measuring section			Order no.
VA 570 Flow sensor with integrated 1/2" measuring section			0695 0570
VA 570 Flow sensor with integrated 3/4" measuring section			0695 0571
VA 570 Flow sensor with integrated 1" measuring section			0695 0572
VA 550 Flow sensor with integrated 1 1/4" measuring section			0695 0573
VA 570 Flow sensor with integrated 1 1/2" measuring section			0695 0574
VA 570 Flow sensor with integrated 2" measuring section			0695 0575
VA 570 Flow sensor with integrated DN 15 measuring section with weld neck flange			0695 2570
VA 570 Flow sensor with integrated DN 20 measuring section with weld neck flange			0695 2571
VA 570 Flow sensor with integrated DN 25 measuring section with weld neck flange			0695 2572
VA 570 Flow sensor with integrated DN 32 measuring section with weld neck flange			0695 2573
VA 570 Flow sensor with integrated DN 40 measuring section with weld neck flange			0695 2574
VA 570 Flow sensor with integrated DN 50 measuring section with weld neck flange			0695 2575
VA 570 Flow sensor with integrated DN 65 measuring section with weld neck flange			0695 2576
VA 570 Flow sensor with integrated DN 80 measuring section with weld neck flange			0695 2577
Outer thread measuring section:			Bestell-Code

DS 500 - Intelligent chart recorder
			Order no.
DP 510 - intelligent chart recorder in basic version (4 sensor inputs)			0500 5000
Option 4 additional sensor inputs for DS 500			Z500 5001
Option 8 additional sensor inputs for DS 500			Z500 5002
Option Integrated webserver			Z500 5003
Option "consumption report" statistics, daily/weekly/monthly report			Z500 5004
Option version for panel mounting			Z500 5006
Option power supply 24VDC (instead of 100...240 VAC)			Z500 5007
Option “mathematics calculat. function” for 4 freely selectable “virtual” channels, (mathematical functions: addition, subtraction, division, multiplication)			Z500 5008
Option: "Totalizer function for analogue signals"			Z500 5009
External Gateway PROFIBUS for RS 485 interface connection			Z500 3008
External Gateway PROFINET for RS 485 interface connection			Z500 3009
Software:
CS Soft Basic - data evaluation in graphic and table form, reading out of the measured data via USB or Ethernet			0554 7040
CS Soft Network - Database Client/Server Solution (up to 5 DS 500) - database (MySQL) to Server - data evaluation via Client-Software			0554 7041
CS Soft Network - Database Client/Server Solution (up to 10 DS 500) - database (MySQL) to Server - data evaluation via Client-Software			0554 7042
CS Soft Network - Database Client/Server Solution (up to 20 DS 500) - database (MySQL) to Server - data evaluation via Client-Software			0554 7043
CS Soft Network - Database Client/Server Solution (> 20 DS 500) - database (MySQL) to Server - data evaluation via Client-Software			0554 7044
Software Support / h			9999 9998
Flow sensor VA 500
			Order no.
VA 500 flow sensor, with RS 485 interface (Modbus-RTU), with analogue output 4...20mA and pulse output (galvanically separated)			0695 5001
Max. Version (185 m/s)			Z695 5003
HighSpeed version (224 m/s)			Z695 5002
Display			Z695 5000
M-Bus (pulse output not available)			Z695 5004
Sensor length 120 mm			ZSL 0120
Sensor length 160 mm			ZSL 0160
Sensor length 220 mm			ZSL 0220
Sensor length 300 mm			ZSL 0300
Sensor length 400 mm			ZSL 0400
Sensor length 500 mm			ZSL 0500
Sensor length 600 mm			ZSL 0600
Sensor length 700 mm			ZSL 0700
Ball valve I/I G 1/2" stainless steel			3300 0002
welding neck, L = 35 mm, male screw, R1/2",stainless steel 1.4301			3300 0006
welding neck, L= 35 mm, male screw, R1/2",stainless steel 1.44571			3300 0007
M12 – T plug for VA 500/520 to connect several sensors			020000823
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease			3200 0010
Oil and fat free, special cleaning			0699 4005
5 point precision calibration of new instrument with ISO certificate			3200 0001
Real gas calibration			3200 0015
Real gas calibration for mixed gases			on request
Flow sensor VA 520 with integrated measuring section
			Order no.
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4301			0695 0520
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4301			0695 0521
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4301			0695 0522
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4301			0695 0523
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4301			0695 0526
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4301			0695 0524
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4301			0695 0525

Option signal output / bus connection
M-Bus (pulse output not available)			Z695 5004
Connection cables:
Connection cable for VA/FA, 5 m, with M12 plug			0553 0104
Connection cable for VA/FA, 10 m, with M12 plug			0553 0105
Connection cable for VA/FA, 20 m, with M12 plug			0553 0120

Real gas calibration for oxygen (O2) with cleaning - free of oil and grease			3200 0010
Option: special cleaning			0699 4005
5 point precision calibration with ISO certificate			3200 0001
Real gas calibration			3200 0015
Real gas calibration for mixed gases			on request
Further accessories:
Closing cap for measuring section in aluminium			0190 0001
Closing cap for measuring section stainless steel 1.4404			0190 0002
M12 – T plug for VA 500/520 to connect several sensors			020000823
Flow measurment VA 500/ VA 520 for below gases
			Order no.
Oxygen (O2), carbon dioxide (CO2), nitrogen (N2), argon (Ar), nitrous oxide (N2O), natural gas, helium (He), hydrogen (H2), propane, methane			on request
Dew point sensors FA 510
			Order no.
FA 500 dew point sensor for desiccant driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface			0699 0510
FA 510 dew point sensor for refrigertation driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface			0699 0512
Measuring chamber with inner threat G1/2" and mounted male coupling DN 7,2 for quick-lock coupling			0699 3390
More measuring chambers please see on catalogue page 60
Connection cables for VA/FA sensors
			Order no.
Connection cable for VA/FA, 5 m with M12 plug			0553 0104
Connection cable for VA/FA, 10 m with M12 plug			0553 0105
Connection cable for VA/FA, 20 m with M12 plug			0553 0120
Pressure sensors
			Order no.
Standard pressure sensor CS 16, 0...16 bar, ± 1 % accuracy of full scale			0694 1886
Precision pressure sensor CS 16, accuracy ± 0.5 %			0694 3555
Standard pressure sensor CS 40, 0...40 bar, ± 1 % accuracy of full scale			0694 0356
Precision Pressure sensor CS 40, accuracy ± 0.5 %			0694 3930
Standard pressure sensor CS 1.6 absolute, 0...1.6 bar abs.,± 0,5 % accuracy of full scale			0694 3550
Standard pressure sensor CS 10 (0…10 bar), ± 1 % accuracy of full scale			0694 3556
Standard pressure sensor CS 10 (0…10 bar), ± 0,5 % accuracy of full scale			0694 3554
Precision pressure sensor CS 100, 0...100 bar, ± 0,5 % accuracy of full scale			0694 3557
Precision pressure sensor CS 250, 0...250 bar, ± 0,5 % accuracy of full scale			0694 3558
Precision pressure sensor CS 400, 0...400 bar, ± 0,5 % accuracy of full scale			0694 3559
Precision pressure sensor CS, -1...+15 bar, ± 0.5 % accuracy of full scale			0694 3553
Precision differential pressure sensor CS 0…400 mbar differential pressure, accuracy: 0.075 % of full scale, static pressure max. 40 bar			0694 3560
Precision pressure sensor CS (0..0.6 bar) accuracy ± 0.5 %			0694 3549
Calibration of pressure sensor 5 points between 0 and 10/16 bar			3200 0004

Temperature sensors
			Order no.
Screw-in temperature probe PT 100 class A, length: 300 mm, d=6mm, with integrated transducer 4…20 mA = -50°C…+500°C (2-wire)			0604 0201
Outdoor temperature probe, PT 100 class B (2-wire) in wall housing (82x55x33 mm), temperature range: -50°C to +80°C			0604 0203
Indoor temperature probe, PT 100 class B (2-wire) in wall housing (82x55x33 mm), temperature range: -50°C to +80°C			0604 0204
Temperature probe PT 100 class A (4-wire) with cable, length: 300 mm, d=6 mm, -70°C to +260°C, 5 m connection cable (PFA) with open ends			0604 0205
Temperature probe PT 100 class A (4-wire) with cable, length: 100 mm, d=6 -70°C to +260°C, 5 m connection cable (PFA) with open ends			0604 0206
Temperature probe PT 100 class A (4-wire) with cable, length: 200 mm, d=6 -70°C to +260°C, 5 m connection cable (PFA) with open ends			0604 0207
Surface temperature probe, magnetic, magnet dimensions 39x26x25 mm, PT 100 class B (2-wire), -30 to +180°C, 5 m connection cable (PFA) with open ends			0604 0208
Clamp screwing 6mm; G 1/2" PTFE clamp ring pressure tight up 10 bar material: stainless steel, temperature range: max. +260°C			0554 0200
Clamp screwing 6mm; G 1/2" stainless steel clamp ring pressure tight up to 16 bar, material: stainless steel, temperature range: max. +260°C			0554 0201
Connection cables for pressure/temperature sensors
			Order no.
Connection cable for sensors 5 m, with open ends			0553 0108
Connection cable for sensors 10 m, with open ends			0553 0109
Clamp-on meters
			Order no.
Clamp-on ammeter 0...400 A TRMS incl. 3 m connection cable with open ends			0554 0510
Clamp-on ammeter 0…1000 A RMS, 4…20 mA = 0…1000 A, 10-30 VDC, 3 m connection cable with open ends			0554 0518
Calibration certificate for clamp-on ammeters, 5 calibration points			0554 3333
CS ENERIUM 30 Current/effective power meter for panel mounting
			Order no.
CS ENERIUM 30 Current/effective power meter for panel mounting, with RS 485 Interface			0554 5355
Current transformer 100/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 21 mm)			0554 5344
Current transformer 200/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 21 mm)			0554 5345
Current transformer 300/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 22 mm)			0554 5346
Current transformer 500/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 22 mm)			0554 5347
Current transformer 600/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 22 mm)			0554 5348
Current transformer 1000/5 A connectable to current/effective power meter for panel mounting (for current bar up to 65 x 32 mm)			0554 5349
Current transformer 2000/5 A connectable to current/effective power meter for panel mounting (for current bar up to 127 x 38 mm)			0554 5350

Connection cable CS ENERIUM 30:			Order no.
Connection cable for sensors 5 m, with open ends			0553 0108
Connection cable for sensors 10 m, with open ends			0553 0109
Connection cable variable length, open ends on both sides			0553 0126
DS 500 mobile - intelligent chart recorder
			Order no.
Intelligent chart recorder DS 500 mobile, 4 sensor inputs			0500 5012
Intelligent chart recorder DS 500 mobile, 8 sensor inputs			0500 5013
Intelligent chart recorder DS 500 mobile, 12 sensor inputs			0500 5014
Option “integrated Webserver”			Z500 5003
Option “consumption report” statistics, daily/weekly/monthly report			Z500 5004
Option “mathematics calculat. function” for 4 freely selectable “virtual” channels, (mathematical functions: addition, subtraction, division, multiplication)			Z500 5008
Option: "Totalizer function for analogue signals"			Z500 5009

Software:
CS Soft Basic - data evaluation in graphic and table form, reading out of the measured data via USB or Ethernet			0554 7040
CS Soft Energy Analyzer for energy and leakage analysis of compressed air stations			0554 7050
Software Upgrade of the already existing CS Soft Basic to CS Soft Energy Analyzer			0554 7045
GSM module for data transfer via the GSM network (mobile network)			on request

Connection cables:
Connection cable for pressure,temperature or external sensors on mobile instruments, ODU / open ends, 5 m			0553 0501
Connection cable for pressure,temperature or external sensors on mobile instruments, ODU / open ends, 10 m			0553 0502
Connection cable for VA/FA 5xx series on mobile instruments,ODU / M 12, 5 m			0553 1503
Connection cable for VA/FA 400 series on mobile instruments,ODU / M 12, 5 m			0553 0503
Extension cable for mobile instruments,ODU / ODU, 10 m			0553 0504
Connection cable for mobile current/effective power meter to DS 500 mobile, 5 m			0553 0506
Adapter for connection cable ODU 5 to 8 pole for existing cable part no. 0553.0111 (for VA/FA sensors) from DS 300 mobile to DS 500 mobile			0553 0507
Adapter for connection cable ODU 5 to 8 pole for existing cable part no. 0553.0110 (for analogue) from DS 300 mobile to DS 500 mobile			0553 0508
Mounted Odu plug for connection on mobile instruments			Z604 0104
Case for all sensors (dimensions: 500 x 360 x 180 mm)			0554 6006
Flow sensors VA 500
			Order no.
Flow sensor VA 500-Max. Version (185 m/s) sensor length 220 mm, incl. 5 m cable to mobile instruments			0695 1124
Flow sensor VA 500 High-Speed Version (224 m/s), sensor length 220 mm incl. 5 m cable to mobile instruments			0695 1125
Sensor length 120 mm			ZSL 0120
Sensor length 160 mm			ZSL 0160
Sensor length 220 mm			ZSL 0220
Sensor length 300 mm			ZSL 0300
Sensor length 400 mm			ZSL 0400
Sensor length 500 mm			ZSL 0500
Sensor length 600 mm			ZSL 0600
Sensor length 700 mm			ZSL 0700
Ball valve I/I G 1/2" stainless steel			3300 0002
welding neck, L = 35 mm, male screw, R1/2",stainless steel 1.4301			3300 0006
welding neck, L= 35 mm, male screw, R1/2",stainless steel 1.44571			3300 0007
M12 – T plug for VA 500/520 to connect several sensors			020000823
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease			3200 0010
Oil and fat free, special cleaning			0699 4005
5 point precision calibration with ISO certificate			3200 0001
Real gas calibration			3200 0015
Real gas calibration for mixed gases			on request
Flow sensor VA 520 with integrated measuring section
			Order no.
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4301			0695 0520
VA520 Flow meter with integrated 1/2", DN 15 measuring section 1,4301			0695 0521
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4301			0695 0522
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4301			0695 0523
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4301			0695 0526
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4301			0695 0524
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4301			0695 0525
Flow measurment VA 500/ VA 520 for below gases
			Order no.
Oxygen (O2), carbon dioxide (CO2), nitrogen (N2), argon (Ar), nitrous oxide (N2O), natural gas, helium (He), hydrogen (H2), propane, methane			on request
Dew point sensors FA 510
			Order no.
FA 510 dew point sensor for mobile instruments, -80…+20°Ctd incl. mobile measuring chamber, 5 m cable and perforated cap			0699 1510
FA 510 dew point sensor for mobile instruments, -20…+50°Ctd incl. mobile measuring chamber, 5 m cable and perforated cap			0699 1512
Connection cables for VA/FA sensors
			Order no.
Connection cable for VA/FA 5xx series on mobile instruments, ODU/M12, 5m			0553 1503
Extension cable for mobile instruments ODU/ODU, 10m			0553 0504
Calibration certificates for flow sensors / dew point sensors
			Order no.
5 point precision calibration for consumption sensors including ISO certificate			3200 0001
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate			0699 3396
Pressure sensors
			Order no.
Standard pressure sensor CS 16, 0...16 bar, ± 1 % accuracy of full scale			0694 1886
Precision pressure sensor CS 16, accuracy ± 0.5 %			0694 3555
Standard pressure sensor CS 40, 0...40 bar, ± 1 % accuracy of full scale			0694 0356
Precision Pressure sensor CS 40, accuracy ± 0.5 %			0694 3930
Standard pressure sensor CS 1.6 absolute, 0...1.6 bar abs.,± 0,5 % accuracy of full scale			0694 3550
Standard pressure sensor CS 10 (0…10 bar), ± 1 % accuracy of full scale			0694 3556
Precision pressure sensor CS 10 (0…10 bar), ± 0,5 % accuracy of full scale			0694 3554
Precision pressure sensor CS 100, 0...100 bar, ± 0,5 % accuracy of full scale			0694 3557
Precision pressure sensor CS 250, 0...250 bar, ± 0,5 % accuracy of full scale			0694 3558
Standard pressure sensor CS 400, 0...400 bar, ± 0,5 % accuracy of full scale			0694 3559
Precision pressure sensor CS, -1...+15 bar, ± 0.5 % accuracy of full scale			0694 3553
Precision differential pressure sensor CS 0…400 mbar differential pressure, accuracy: 0.075 % of full scale, static pressure max. 40 bar			0694 3560
Precision pressure sensor CS (0..0.6 bar) accuracy ± 0.5 %			0694 3549
Calibration of pressure sensor 5 points between 0 and 10/16 bar			3200 0004
Precision differential pressure sensor for further measuring, ranges, e. g. 0…75 mbar, 0…2 bar, 0…8 bar, 0…21 bar, 0…70 bar, 0…200 bar, 0…420 bar			on request

Dew point set DS 52 for refrigeration driers
			Order no.
Dew point set DS 52 for refrigeration driers			0600 5120
consisting of:
DS 52 LED display in wall housing			0500 0009
FA 510 dew point sensor for refrigertation driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface			0699 0512
Standard measuring chamber up to 16 bar			0699 3390
Connection cable for VA/FA, 5 m with M12 plug			0553 0104

Options:
Power supply 24 VDC (instead of 230 VAC)			Z500 0001
Power supply 110 VAC (instead of 230 VAC)			Z500 0002
Alarm unit mounted at wall housing			Z500 0003
Alarm unit for external mounting with 5 m cable			Z500 0004
Connecting cable version Switzerland - three-pole			Z553.CH
Connecting cable version USA - three-pole			Z553.USA

Calibration and adjustment:
Precision calibration at 3°Ctd including ISO certificate			0699 3396
Precision calibration in the range of -20 to 50°Ctd, one additional point, freely selectable			0700 7710
Control and calibration set 11.3% RH			0554 0002
Control and calibration set 33 % RH			0554 0004
Control and calibration set 75,3 % RH			0554 0005
Dew point set DS 400
			Order no.
Dew point set DS 400 for desiccant driers (-80…+20°Ctd)			0601 0510
consisting of:
Chart recorder DS 400			0500 4000
FA 510 dew point sensor for desiccant driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface (-80…+20°Ctd)			0699 0510
Standard measuring chamber up to 16 bar			0699 3390
Connection cable for VA/FA, 5 m with M12 plug			0553 0104

Dew point set DS 400 for refrigeration driers (-20…+50°Ctd)			0601 0512
consisting of:
Chart recorder DS 400			0500 4000
FA 510 dew point sensor for refrigertation driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface (-20…+50°Ctd)			0699 0512
Standard measuring chamber up to 16 bar			0699 3390
Connection cable for VA/FA, 5 m with M12 plug			0553 0104

Optionen:
Integrated data logger for 100 million measured values			Z500 4002
Integrierte Ethernet- und RS 485 Schnittstelle			Z500 4004
2 additional sensor inputs for analogue sensors (like: pressure, temperautre sensors ...)			Z500 4001
2 additional sensor inputs for digital sensors (SDI/Modbus)			Z500 4003
Integrated Webserver			Z500 4005
CS Soft Basic - data evaluation in graphic and table form, reading out of the measured data via USB or Ethernet			0554 7040
Alarm device assembled			Z500 0003
Alarm device for external assembly incl. 5 m cable			Z500 0004
Calibration and adjustment:
Precision calibration at -40 °Ctd or 3°Ctd including ISO certificate			0699 3396
DS 400 - Chart recorder
			Order no.
Product	sensor- input 1+2	sensor- input 3+4
Chart recorder DS400 - with 3.5“ graphic display - easy operation with touch screen	digital	----------	0500 4000 D
	digital	digital	0500 4000 DD
	digital	analogue	0500 4000 DA
	analogue	----------	0500 4000 A
	analogue	analogue	0500 4000 AA
Options:
Integrated data logger for 100 Mio. measured values			Z500 4002
Integrated Ethernet- and RS 485 interface			Z500 4004
2 additional sensor inputs for analogue sensors (like: pressure, temperautre sensors ...)			Z500 4001
2 additional sensor inputs for digital sensors (SDI/Modbus)			Z500 4003
External Gateway PROFIBUS for RS 485 interface connection			Z500 3008
External Gateway PROFINET for RS 485 interface connection			Z500 3009
Option Integrated Webserver DS400			Z500 4005
Option “mathematics calculat. function” for 4 freely selectable “virtual” channels			Z500 4007
Option "Totalizer function for analogue signals"			Z500 4006

Further options:
CS Soft Basic - data evaluation in graphic and table form, reading out of the measured data via USB or Ethernet			0554 7040
CS Soft Network - Database Client/Server Solution (up to 5 DS 400) - database (MySQL) to Server - data evaluation via Client-Software			0554 7041
CS Soft Network - Database Client/Server Solution (up to 10 DS 400) - data base (MySQL) to server - data evaluation via Client-Software			0554 7042
CS Soft Network - Database Client/Server Solution (up to 20 DS 400) - data base (MySQL) to server - data evaluation via Client-Software			0554 7043
CS Soft Network - Database Client/Server Solution (> 20 DS 400) - data base (MySQL) to server - data evaluation via Client-Software			0554 7044
Software Support / h			9999 9998

Ready for plug in and parametrization			0990 0010
Everything ready for plug in			0990 0011
Flow sensor VA 500
			Order no.
VA 500 flow sensor, with RS 485 interface (Modbus-RTU), with analogue output 4...20mA and pulse output (galvanically separated)			0695 5001
Max. Version (185 m/s)			Z695 5003
HighSpeed version (224 m/s)			Z695 5002
Display			Z695 5000
M-Bus (pulse output not available)			Z695 5004
Sensor length 120 mm			ZSL 0120
Sensor length 160 mm			ZSL 0160
Sensor length 220 mm			ZSL 0220
Sensor length 300 mm			ZSL 0300
Sensor length 400 mm			ZSL 0400
Sensor length 500 mm			ZSL 0500
Sensor length 600 mm			ZSL 0600
Sensor length 700 mm			ZSL 0700
Ball valve I/I G 1/2" stainless steel			3300 0002
welding neck, L = 35 mm, male screw, R1/2",stainless steel 1.4301			3300 0006
welding neck, L= 35 mm, male screw, R1/2",stainless steel 1.44571			3300 0007
M12 – T plug for VA 500/520 to connect several sensors			020000823
Real gas calibration for oxygen (O2) with cleaning - free of oil and grease			3200 0010
Oil and fat free, special cleaning			0699 4005
5 point precision calibration of new instrument with ISO certificate			3200 0001
Real gas calibration			3200 0015
Real gas calibration for mixed gases			on request
Flow sensor VA 520 with integrated measuring section
			Order no.
VA520 Flow meter with integrated 1/4", DN 8 measuring section 1,4301			0695 0520
VA550 Flow meter with integrated 1/2", DN 15 measuring section 1,4301			0695 0521
VA520 Flow meter with integrated 3/4", DN 20 measuring section 1,4301			0695 0522
VA520 Flow meter with integrated 1", DN 25 measuring section 1,4301			0695 0523
VA520 Flow meter with integrated 1 1/4", DN 32 measuring section 1,4301			0695 0526
VA520 Flow meter with integrated 1 1/2", DN 40 measuring section 1,4301			0695 0524
VA520 Flow meter with integrated 2", DN 50 measuring section 1,4301			0695 0525

Option signal output / bus connection
M-Bus (pulse output not available)			Z695 5004

Connection cables:
Connection cable for VA/FA, 5 m, with M12 plug			0553 0104
Connection cable for VA/FA, 10 m, with M12 plug			0553 0105
Connection cable for VA/FA, 20 m, with M12 plug			0553 0120

Real gas calibration for oxygen (O2) with cleaning - free of oil and grease			3200 0010
Option: special cleaning			0699 4005
5 point precision calibration with ISO certificate			3200 0001
Real gas calibration			3200 0015
Real gas calibration for mixed gases			on request

Further accessories:
Closing cap for measuring section in aluminium			0190 0001
Closing cap for measuring section stainless steel 1.4404			0190 0002
M12 – T plug for VA 500/520 to connect several sensors			020000823
Flow measurment VA 500/ VA 520 for below gases
			Order no.
Oxygen (O2), carbon dioxide (CO2), nitrogen (N2), argon (Ar), nitrous oxide (N2O), natural gas, helium (He), hydrogen (H2), propane, methane			on request
Dew point sensors FA 510
			Order no.
FA 510 dew point sensor for desiccant driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface			0699 0510
FA 510 dew point sensor for refrigertation driers incl. inspection certificate, 4…20 mA output signal (3-wire connection) and Modbus-RTU interface			0699 0512
Measuring chamber with inner threat G1/2" and mounted male coupling DN 7,2 for quick-lock coupling			0699 3390
More measuring chambers please see on catalogue page 60
Connection cables for VA/FA sensors
			Order no.
Connection cable for VA/FA, 5 m with M12 plug			0553 0104
Connection cable for VA/FA, 10 m with M12 plug			0553 0105
Connection cable for VA/FA, 20 m with M12 plug			0553 0120
Pressure sensors
			Order no.
Standard pressure sensor CS 16, 0...16 bar, ± 1 % accuracy of full scale			0694 1886
Precision pressure sensor CS 16, accuracy ± 0.5 %			0694 3555
Standard pressure sensor CS 40, 0...40 bar, ± 1 % accuracy of full scale			0694 0356
Precision pressure sensor CS 40, accuracy ± 0.5 %			0694 3930
Precision pressure sensor CS 1.6 absolute, 0...1.6 bar abs.,± 0,5 % accuracy of full scale			0694 3550
Standard pressure sensor CS 10 (0…10 bar), ± 1 % accuracy of full scale			0694 3556
Precision pressure sensor CS 10 (0…10 bar), ± 0,5 % accuracy of full scale			0694 3554
Precision pressure sensor CS 100, 0...100 bar, ± 0,5 % accuracy of full scale			0694 3557
Precision pressure sensor CS 250, 0...250 bar, ± 0,5 % accuracy of full scale			0694 3558
Precision pressure sensor CS 400, 0...400 bar, ± 0,5 % accuracy of full scale			0694 3559
Precision pressure sensor CS, -1...+15 bar, ± 0.5 % accuracy of full scale			0694 3553
Precision differential pressure sensor CS 0…400 mbar differential pressure, accuracy: 0.075 % of full scale, static pressure max. 40 bar			0694 3560
Precision pressure sensor CS (0..0.6 bar) accuracy < 0.5 %			0694 3549
Calibration of pressure sensor 5 points between 0 and 10/16 bar			3200 0004
Precision differential pressure sensor for further measuring, ranges, e. g. 0…75 mbar, 0…2 bar, 0…8 bar, 0…21 bar, 0…70 bar, 0…200 bar, 0…420 bar			on request
Temperature sensors
			Order no.
Screw-in temperature probe PT 100 class A, length: 300 mm, d=6mm, with integrated transducer 4…20 mA = -50°C…+500°C (2-wire)			0604 0201
Outdoor temperature probe, PT 100 class B (2-wire) in wall housing (82x55x33 mm), temperature range: -50°C to +80°C			0604 0203
Indoor temperature probe, PT 100 class B (2-wire) in wall housing (82x55x33 mm), temperature range: -50°C to +80°C			0604 0204
Temperature probe PT 100 class A (4-wire) with cable, length: 300 mm, d=6 mm, -70°C to +260°C, 5 m connection cable (PFA) with open ends			0604 0205
Temperature probe PT 100 class A (4-wire) with cable, length: 100 mm, d=6 -70°C to +260°C, 5 m connection cable (PFA) with open ends			0604 0206
Temperature probe PT 100 class A (4-wire) with cable, length: 200 mm, d=6 -70°C to +260°C, 5 m connection cable (PFA) with open ends			0604 0207
Surface temperature probe, magnetic, magnet dimensions 39x26x25 mm, PT 100 class B (2-wire), -30 to +180°C, 5 m connection cable (PFA) with open ends			0604 0208
Clamp screwing 6mm; G 1/2" PTFE clamp ring pressure tight up 10 bar material: stainless steel, temperature range: max. +260°C			0554 0200
Clamp screwing 6mm; G 1/2" stainless steel clamp ring pressure tight up to 16 bar, material: stainless steel, temperature range: max. +260°C			0554 0201
Connection cables for pressure/temperature sensors
			Order no.
Connection cable for sensors 5 m, with open ends			0553 0108
Connection cable for sensors 10 m, with open ends			0553 0109
Clamp-on meters
			Order no.
Clamp-on ammeter 0...400 A TRMS incl. 3 m connection cable with open ends			0554 0510
Clamp-on ammeter 0…1000 A RMS, 4…20 mA = 0…1000 A, 10-30 VDC, 3 m connection cable with open ends			0554 0518
Calibration certificate for clamp-on ammeters, 5 calibration points			0554 3333
CS ENERIUM 30 Current/effective power meter for panel mounting
			Order no.
CS ENERIUM 30 Current/effective power meter for panel mounting, with RS 485 Interface			0554 5355
Current transformer 100/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 21 mm)			0554 5344
Current transformer 200/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 21 mm)			0554 5345
Current transformer 300/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 22 mm)			0554 5346
Current transformer 500/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 22 mm)			0554 5347
Current transformer 600/5 A connectable to current/effective power meter for panel mounting (for cabels up to Ø 22 mm)			0554 5348
Current transformer 1000/5 A connectable to current/effective power meter for panel mounting (for current bar up to 65 x 32 mm)			0554 5349
Current transformer 2000/5 A connectable to current/effective power meter for panel mounting (for current bar up to 127 x 38 mm)			0554 5350

Connection cable CS ENERIUM 30:
Connection cable for sensors 5 m, with open ends			0553 0108
Connection cable for sensors 10 m, with open ends			0553 0109
Connection cable variable length, open ends on both sides			0553 0126
FA 500 dew point monitoring
			Order no.
FA 500 dew point sensor for refrigeration driers, -20...50°Ctd			0699 0501
FA 500 dew point sensor for desiccant driers, -80...20°Ctd			0699 0502
FA 500 dew point sensor, -60...30°Ctd			0699 0503

Options:
Ethernet-Interface for VA500/VA520, FA500			Z695 5006
Ethernet-Interface PoE for VA500/VA520, FA500			Z695 5007
M-Bus (pulse output not available)			Z695 5004
Option analogue output FA5xx, Special version 2…10 Volt			Z699 0510
Option max. pressure FA5xx 350 bar			Z699 0515
Option max. pressure FA5xx 500 bar			Z699 0516
Option special scaling FA5xx 4…20 mA=__ … __ g/m³, ppm etc.			Z699 0514
Option connection thread FA5xx, 5/8" UNF			Z699 0511
Option connection thread FA5xx, 1/2" NPT			Z699 0512
Option surface condition FA5xx, free of oil & grease			Z699 0517

FA 550 - for dew point measurement in compressed air and gas under harsh industrial conditions

FA 550 - Dew point sensor in robust die-cast aluminum housing

The FA 550 is ideal for determining the dew point in outdoor areas and harsh industrial environments.

Mobile Dew Point Measurement System with integrated Pressure Sensor - DP 400 mobile

DP 400 mobile - Mobile Dew Point Measurement with Pressure Sensor

Mobile dew point measurement system to measure dew point and other pressure dependent values.

Portable dew point meter DP 510 with third party sensor

DP 510 - Portable dew point meter with third-party sensor

Disposes all functions of our DP 500 and comes with an additional - freely assignable - sensor input.

Stationary dew point measurement in compressed air systems with DS 400 - dew point set

DS 400 Set - Stationary dew point measurement in compressed air systems

Ideal for the monitoring of refrigeration or adsorption dryers.

CONSUMPTION METERS INSERTION-VERSION ORDER-NO.
VA 500 flow meter, Max version (185 m/s), probe length 220 mm, incl. 5 m connection cable to mobile devices	0695 1124
VA 500 flow meter, High-Speed version (224 m/s), probe length 220 mm, incl. 5 m connection cable to mobile devices	0695 1125
VA 550 Flow meter, measuring head in robust aluminium die casting housing	0695 0550 + order code A_...M..._

CS PM 600 current/effective power meter up to 100 A	0554 5341
CS PM 600 current/effective power meter up to 600 A	0554 5342
Mobile current effective power meter with 3 external current transformers for big machines and plants External current transformers for clamping around the phases (100 A or 600 A) External magnetic measuring tip for measuring the voltage Misst kW, kWh, cos, phi, kVar, kVA Data transfer via Modbus Incl. connection cable for mobile current/effective power meter to mobile instruments, 5 m
Current transformer 100A/1A consisting of 3 transformers for mobile instruments	Z554 0001
Current transformer 600A/1A consisting of 3 transformers for mobile instruments	Z554 0002
Current transformer 1000A/1A consisting of 3 transformers for mobile instruments	Z554 0003