Thiết bị đo áp suất Pascal CI4100 - Labom Việt Nam

• Pressure transmitter for the measuring of relative and absolute pressures of gases, vapors and liquids
• Stainless steel case in sturdy design, degree of protec-tion IP 65/67
• Accuracy 0.1 %
• High-resolution graphic display with Intuitive 4-button operation and backlight
• Comprehensive parameterising functions
• Further features

• Explosion protection for gases and dust
• Classification per SIL2
• Certificate of measuring equipment for Russian Federation
• Material certificate per EN 10204
• Calibration certificate per EN 10204
• Further options

Measuring ranges :

see data sheet

Design:	Two-chamber case, continuously rotatable by ± 170° Case surface blasted
Material case:	- Stainless steel mat.no. 1.4301/1.4305 (304/303) - Stainless steel mat.no. 1.4404 (316L)
Material front cover:	- Polypropylene, black - Stainless steel mat.no. 1.4305 (303) - Stainless steel mat.no. 1.4404 (316L)
Gaskets:	Silikone / NBR
Degree of protection per EN 60529:	- IP 65 / IP 67 - IP 69K
Climatic cate-gory per EN 60721 3-4:	4K4H
Vibration resistance per EN 61298-3:	10…60 Hz: ± 0,35 mm 60…1000 Hz: 5 g
Material window:	- Macrolon - Non splintering glass (requires front cover of stainless steel)
Elec. connec-tion:	- Circular connector M12  - Cable gland M16x1.5, PA black  - Cable gland M16x1.5, stainless steel  - Cable gland M20x1.5, PA black - Cable gland M20x1.5, stainless steel  - 1/2" NPT, PA black
	Further connections upon request
Terminal blocks:	- Spring clamp terminals up to 1.5 mm2 - Pole terminals up to 2.5 mm2 - Screwed terminals up to 2.5 mm2
Weight:	Approx. 1.4 kg
Type plate:	Laser marking

Position:	- bottom  - back (Flush mounting upon request )
Design:	- G1/2 B per EN 837-1 - G1/4 B per EN 837-1 - G1/4 A per DIN 3852 Form E - 1/2" NPT - 1/4" NPT

Sensor:	piezoressistive	thin film
Sensor diaphragm:	1.4404/1.4435 (316L)	1.4542 (630)
Socket:	1.4404/1.4435 (316L)	1.4301/1.4404 (304/316L)

Sensor:	piezoresistive	thin film
Sensor filling:	Synthetic oil, free of silicone FD1, FDA listed	without

Reference cond.:	per EN 60770-1 TU = const. (15…25) C φ = const. (45...75) % r.F. pU = const. (860...1060) mbar UB = 24 V DC (± 3 V DC) RB = 50 Ω, HART: 250 Ω Ground connected  MBA = 0 bar
Calibration position:	Process connection bottom: vertical Process connection back: horizontal
Deviation of characteristic:	Refer to the adjusted measuring span (Limit point method per DIN 16086)
	Nominal range 1-400 bar, 1-16 bar abs. Turndown 5:1; 0.1 % Turndown > 5:1; 0.02 % x TD
	Nominal range 0.25 bar Turndown 5:1; 0.15 % Turndown > 5:1; 0.03 % x TD
Long-term drift:	Refer to nominal range ≤ 0,1 %/Jahr
Operational availability:	< 12 s
Response time t90 at current output:	for 20 Hz measuring rate: typically 120 ms for 100 Hz measuring rate: typically 50 ms
Temperature influence, case:	Refer to nominal range
	Ambient temperature -20…80 °C: Nominal range 1-400 bar 0.1 %/10K , max. 0.3 % Nominal range 1-16 bar 0.1 %/10K , max. 0.3 % Nominal range 0.25 bar 0.15 %/10K, max. 0.4 %
	Ambient temperature -40…-20 °C: Typical 0.2 %/10K

Display:	- High-resolution graphic display with backlight - 4-button operation - Freely configurable display modes - continuously rotatable by ± 170 (de-tent every 90°) - Optional: Remote display and control unit, can be used up to 10 m away from measuring point
Configuration memory:	- All parameterisation data can be cop-ied from the device into the configuration memory in the display module. The data is permanently stored there, even in the event of power failure. - The parameters can be transferred simply and quickly to other devices.

Signal:	2-wire technology 4…20 mA Lower limit 3.8…4 mA Upper limit 20…21 mA Lower alarm current < 3.6 mA Upper alarm current > 21 mA Current limitation 22 mA Digital communication: HART ® protocol, version 7
	Communication via:  - Siemens PDM - Pactware or compatible systems (FDT/DTM) - 375 / 475 Field Communicator
Function:	Adjustable: - Linear - Inverse response - By square root - Table function with up to 64 support points
Turndown:	Max. 100:1
Damping:	0…999.9 s selectable in steps of 0.1 s
Measuring rate:	20 Hz, switchable to 100 Hz
Resolution:	1 µA
Current sensing func.	3.55…21.5 mA selectable in steps of 0.001 mA
Load RB:	RB ≤ (UV-12V DC)/0,022 A [Ohm] UV = supply voltage
	for HART communication: RB ≥ 230 Ω

Functional range:	12…30 V DC, protected against polarity reversal
Ripple:	< 5 %

Ambient:	-40…80 °C (Display visibility is limited at temperatures below - 30 °C)
Media:	-40…100 °C
Storage:	-40…80 °C

See documents

CI4100, CI4103

Thiết bị đo áp suất Pascal CI4100 - Labom Việt Nam