Thiết bị đo áp suất CS2100 - Labom Việt Nam

• Multifunctional pressure transmitter/pressure switch
• Degree of protection IP 65
• 4 digit LED display, can be mirror-imaged by 180°
• Indication module rotatable by 300°
• Measuring ranges: 0…100 mbar to 0…400 bar rel., 0…1 bar to 0…6 bar abs.
• Further features

• Certificate of measuring equipment for Russian Federation
• Material certificate as per EN 10204-3.1
• Calibration certificate as per EN 10204-3.1
• 2 floating contacts
• Switching contacts with high switching current (1A)
• Further options

Design:	Sturdy case design
	Fully encapsulated electronics unit
Material:	Stainless steel mat.-no. 1.4301 (304) Indication module: macrolon
Degree of protection:	- IP 65 per EN 60529 - Optional IP 67 per EN 60529
Pressure compensation:	Aeration via sintered filter
Electrical connection:	- circular connector M12, 4 pin - circular connector M12, 8 pin (necessary for devices with switching contacts)
	Incl. sealing ring to ensure case is completely sealed
Climatic category:	DIN EN 60721 3-4, 4K4H

Design:

See order details

Sensor:	Piezoresistive	Thin film
Sensor diaphragm:	1.4404/1.4435 (316L)	1.4542 (630)
Socket:	1.4404/1.4435 (316L)	1.4301/1.4404 (304/316L)

Sensor:	Piezoresistive	Thin film
Sensor filling:	Synthetic oil, free of silicone FD1, FDA listed	without

Measuring range / overload limit:	See order details
Vakuum tightness:	Long term vacuum measurements at relative measurement ranges can alter the device characteristics. (piezoresistive measuring system, only)

Zero point:

Easy zero setting max. ± 20 %.

Limit point setting:	per DIN 16086
Accuracy (Lin./Hyst./Repr.):	0.2 % v. of mr (mr ≥ 250 mbar) 0.5 mbar (mr < 250 mbar)
Long-term drift:	≤ 0.1 % / year per EN 61298-1
Temperature influence:	Range: 0…50 °C: ≤ 0.25 % of mr (mr ≥ 400 mbar) ≤ 0.4 % of mr (mr < 400 mbar) ≤ 0.5 % of mr (mr < 160 mbar)
	Range: -20…0 and 50…85 °C: ≤ 0.4 % of mr (mr ≥ 400 mbar) ≤ 0.6 % of mr (mr < 400 mbar) ≤ 0.8 % of mr (mr < 160 mbar)
	(mr = measuring range)

Type:	4 digit, red LED with 7 segments
Digit high:	8.5 mm
Resolution:	-9999…9999 digit
Accuracy:	± 0,2 % ± 1 digit
Temperatureinfluence:	± 0,1 %/10K
Alignment:	Can be rotated through 300°, Can be mirror-imaged by 180° when installed upside down
Indication:	Visual confirmation for operator when a button is pressed
Decimal point:	Automatic setting depending on measuring range/unit, max. 3 decimal places Or manual setting 0...3 decimal places
Measuring unit:	bar, mbar, PSI, kPa, MPa, %, mA

Signal:	4…20 mA , 2-wire technology
Sampling rate:	10 measurements / second
Current range:	3.8…20.8 mA
Resolution:	2 μA
Current limitation:	≤ 22 mA
Alarm state:	< 3.6 mA
Load, RB:	RB ≤ (UV-14V)/0.022A [Ohm] (UV = supply voltage)

Type:	2 floating contacts with common ground (low side NPN) or common power supply (high side PNP)
Switching capacity:	200 mA, short-circuit-proof Optional 1 A
Switching status:	breakers or makers, programmable, device off circuit: open contact
Switching function:	window / hysteresis, programmable
Setting range:	within range limits
Hysteresis:	within range limits
Switching delay:	0,0…999.9s
Repeat accuracy:	0.2 % of full-scale value
Temperature influence:	± 0.1 % / 10K
Galvanic isolation:	between transmitter and outputs
Switching cycles:	> 10 millions
Voltage drop:	< 1 V (< 1.5 V, if current is > 100 mA)
Output state indicator:	red LED per switching output
Paramerterisation:	3-key parameterisation

Functional range:

14…30 V DC

Ambient:	-20…85 °C
Media:	-20…100 °C
Storage:	-40…85 °C

See documents

Mounting position:	At choice
Calibration position:	Vertical

Parameterisation see operating instruction BA_060.

CS2100

Thiết bị đo áp suất CS2100 - Labom Việt Nam