Thiết bị đo áp suất CC6010-C - Labom Việt Nam

Mô tả:

CB6010 Labom Việt Nam

Chia sẻ:

Số lượng

Chi tiết sản phẩm

Thiết bị đo áp suất CC6010-C

Thiết bị đo áp suất CC6010-C Labom Việt Nam

Labom Việt Nam

PRESSURE TRANSMITTER COMPACT - CHEMICAL / PETROCHEMICAL INDUSTRY CC6010-C Labom Việt Nam

Features

Measuring ranges 0...250 mbar up to 0...400 bar
Linearity error including hysteresis <+ 0.2 % f.s.
Piezoresistive measuring system
Separating foil from stainless steel or special materials
Completely encapsulated electronics
Further features

Options

Explosion protection for gases
Classification per SIL2
Inspection certificate material certificat as per DIN EN 10204-3.1

TECHNICAL DATA

Constructional design / case

Design:	- fiel housing IP 65 or IP 67, with cable gland - right-angle plug per DIN EN 175301-803-A (DIN 43650 Form A), IP 65 - cable connection, IP 67 - circular connector M12, IP 65
	case material stainless steel
	union nut: polyamide (with plug connector or cable connection for electr. connection) electronics encapsulated with silicone.
	Inner chamber aeration for measuring ranges < 16 bar over case thread or connection cable (depending on design)
Process connection:	see order code for variants material-Nr.: 1.4404 (316L) for the sleeves
Temperature ranges:	- ambient temperature range: -25...+70 °C - storage temperature range: -10...+90 °C process temperature: see order details
Measuring ranges/overrange limits:	see order details intermediate measuring ranges upon request
Response time:	≤ 20 ms
Measuring accuracy:	see data sheet
Auxiliary energy supply:	standard design: - nominal voltage 24 V DC - function range 6...30 V DC - max. allowable operating voltage 30 V DC
Supply voltage influenc:	≤ 0.01 % f.s. / V
Output signal:	4...20 mA, 2-wire technology 0...20 mA, 3-wire technology 4...20 mA, 3-wire technology 0...10 V, 3-wire technology
Current limitation in output signal:	max. output current approx. 30 mA
Adjusting range:	approx. ± 5 % f.s.; zero point and measuring span separately adjustable
Burden:	2-wire circuitry standard design R_a = U_B-6V / 20 mA (KOhm) U_B = operating voltage R_a = max. permissible burden resistance (incl. lead)
Functional safety:	EN 61508, classificatio per SIL 2,TÜV-Reg.-No. 44 799 13190204
Burden influenc:	or 500 ohm burden change: ≤ 0.1 % f.s.
Weights (without diaphragm seal):	- fiel housing: approx. 460 g - case with connector: approx. 200 g
Installation position:	any
EMC test:	- noise immunity according to EN 50082 section 2, version March 1995 issue for industry - emitted interference according to EN 50081section 1, 1993 issue for residential and industrial areas
	Device emits no radiation of its own