TT02 Mark 10 - Đồng hồ đo lực vặn xoay Mark 10 Việt Nam

Liên hệ:

Liên hệ

Mã sản phẩm:

MTT02-12, MTT02-25, MTT02-50, MTT02-100

Hãng sản xuất:

Mark 10

Xuất xứ:

USA

Tình trạng:

Mới 100%

Mô tả:

Đồng hồ đo lực vặn xoay MTT02-12, MTT02-25, MTT02-50, MTT02-100 Mark 10, đại lý mark 10 Việt Nam, hãng mark 10 tại Việt Nam

Chia sẻ:

Số lượng

Thông số kỹ thuật TT02 Mark 10

Accuracy:		±0.3% of full scale
Sampling rate:		7,000 Hz
Power:		AC or rechargeable battery. Multi-step low battery indicator is displayed, tester shuts off automatically when power is too low.
Battery life:		Backlight on: up to 7 hours of continuous use Backlight off: up to 24 hours of continuous use
Measurement units:		ozFin, lbFin, kgFcm, Nm, Ncm
Output:		USB / RS-232: Configurable up to 115,200 baud. Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible devices. Analog: ±1 VDC, ±0.25% of full scale at capacity, General purpose: Three open drain outputs, one input. Set points: Three open drain lines.
Configurable settings:		1st/2nd peak, digital filters, outputs, automatic shutoff, default settings, key tones, backlight, audio alarms, passwords, calibration
Safe overload:		150% of full scale (display shows “OVER” at 110% and above)
Weight:		5.8 lb [2.6 kg]
Included items:		1/4” hex to 3/8” square adapter, universal voltage AC adapter, battery, quickstart guide, USB cable, resource CD (USB driver, MESUR™ Lite software, MESUR™gauge and MESUR™gauge Plus 90-day trial, and users guide), and NIST-traceable certificate of calibration (cert with data is available for an additional charge).
Environmental requirements:		40°F - 100°F [5°C - 45°C], <96% humidity (non-condensating)
Warranty:		3 years (see individual statement for further details)

Torque Tool Testers Series TT02	Thiết bị đo lực vặn của dụng cụ	MTT02-12 Mark 10
Torque Tool Testers Series TT02	Thiết bị đo lực vặn của dụng cụ	MTT02-25 Mark 10
Torque Tool Testers Series TT02	Thiết bị đo lực vặn của dụng cụ	MTT02-50 Mark 10
Torque Tool Testers Series TT02	Thiết bị đo lực vặn của dụng cụ	MTT02-100 Mark 10